The Basics of Air Conditioner Installation Gold CoastHomeowners Should Know

If you want to have any kind of air conditioner installed in your home, then you will probably need to call in professionals in order to arrange this, and you may also want to ensure that you understand exactly what is involved with installing an air-conditioner unit in a wall, or connecting it to ducts. Depending upon type of air conditioner you have bought, installation can be very simple, or it can involve a lot of hard work. If you understand how the air conditioner works, and how it should be installed, then you can work out how long your installation team will need, or at least understand what the team are doing as you watch them fitting the conditioner to your rooms.

In order to understand the process of air conditioner installation Gold Coast homeowners will need to know how the air conditioning system works. All units have the same basic ingredients, which includes a condensing unit, and evaporator coil, and a refrigerant. There will also be a fan, and a temperature control switch which will allow you to get the temperature of the room. When you pick a temperature which is lower than the current heat of your room, the air conditioner will start to work. The power turns on the condensing unit, causing a compressor pump to move gas through the condenser, and it then turns into liquid and passes through the refrigerant area. This increases the temperature of the liquid, turning it back into gas as it passes over the evaporator unit. This is the process which allows an air conditioner to take warm air from the room (as gas) and bring cool air into the room (as re-created gas).

When the air conditioning unit is installed into your home, there are two main ways that it can be fitted. The first involves creating a hole in a wall, or in a window, and connecting the external parts of the A/C unit where the gas is turned into liquid, with the internal parts where it is heated into a gas. These are the most basic kinds of unit fittings, and can be time consuming since they require physical holes to be made, and the parts connected through that hole. However, it can be done within a few hours.

The second type of unit fitting involves duct and split-system A/C units. These require more work, since there is a single outside point but a number of internal devices, all connected to that external point. If you want this kind of air conditioner installation Gold Coast homeowners will have to call in a professional team who have experience with this type of air conditioner unit, and can fit them without creating holds in ducts, or damaging the unit.